Skip to main content
Connect QuickBooks Online and the invoices you send, the payments you take, and your card payouts are recorded in QuickBooks for you, so nobody types them in twice. QuickBooks is for US companies on Growth and Pro. On Starter the page shows an upgrade.

How it works

Jomioz sends information one way, into QuickBooks Online. Jomioz is where you make changes.
  • Make changes in Jomioz. The next send updates it in QuickBooks. A change you make only in QuickBooks is not copied back.
  • Clearing a field in Jomioz leaves the old value in QuickBooks.
  • Deleting, archiving, or voiding something in Jomioz leaves it as it is in QuickBooks.
  • There is no Sync now button and no Send to QuickBooks button. Everything goes on its own when you send an invoice or take a payment.
  • You connect one QuickBooks company to one Jomioz account. A QuickBooks company can be connected to one Jomioz account at a time.

What is sent

What is not sent

  • Estimates. An estimate stays in Jomioz. A deposit taken on an estimate is sent as a payment.
  • Draft invoices and voided invoices, with the default settings.
  • The example data from sign-up: the example customer, the example invoices, and the starter price book items.
  • Archived customers. If a customer is archived after it was sent, it stays in QuickBooks.

Before you start

You need:
  • A US company in Jomioz, on Growth or Pro.
  • A US QuickBooks Online company. QuickBooks Desktop is not supported.
  • Permission to change company settings in Jomioz. If the buttons are grayed out, ask someone who has it.
  • A checking account in QuickBooks, if you take card payments with Jomioz Payments. See step 4 below.
If your Jomioz company is not in the US, or the QuickBooks company is not in the US, connecting is refused.

Set it up

1

Open QuickBooks

Go to Settings → Integrations → QuickBooks.
2

Connect

Click Connect QuickBooks and approve the QuickBooks company. Nothing is copied across at the moment you connect. The status becomes Needs an income account. If that QuickBooks company is already connected to another Jomioz account, you see a message saying so. Disconnect it there first.
3

Choose an income account and save

Under Accounts, choose Income account. A bar at the bottom says Unsaved changes. Click Save. Products and invoices wait until that account is saved. The status then says Connected.
4

Choose a checking account

Choose Checking account and click Save again. The list shows checking accounts only. If it is empty, create one in QuickBooks first: Accounting → Chart of accounts → New, account type Bank, detail type Checking. Card payments stay in Undeposited Funds until Stripe pays you. The payout is then deposited into this account. Until you choose one, the payout stays in Jomioz and the Activity tab asks you to choose. The choice does not change the bank Stripe pays out to.
Leave Deposit account on Undeposited Funds unless your bookkeeper asks for another account. Leave Tips account on Don’t post tips unless you want card tips posted as their own journal entry.

What happens after you send an invoice

With the default settings:
  1. You send the invoice. A draft stays in Jomioz.
  2. The customer is created or matched in QuickBooks, then the products on the invoice, then the invoice.
  3. You take a payment. It is applied to that QuickBooks invoice.
  4. A card payment sits in Undeposited Funds. A cash or check payment can land in the deposit account you chose.
  5. When Stripe marks the payout paid, QuickBooks gets one deposit in your checking account, with the fees taken out.
You can see the result on the invoice, the customer, and the price book item. The QuickBooks row there says Synced, Warning, Error, Pending, or Not linked yet. Open in QuickBooks opens it there.
  • Warning means it was saved in QuickBooks and something needs a look, usually tax.
  • Error means it was not saved. Read the sentence on the Activity tab.

The QuickBooks page

The page has three tabs:
  • Activity opens first. It lists what needs your attention, and what was sent.
  • Settings holds the connection, accounts, sales tax, and when to sync.
  • Import and older items holds the optional import and the sync for older work.
Until an income account is saved, the page opens on Settings instead, because nothing can sync before then.

Activity

Activity opens on Needs attention. It shows one row for each customer, invoice, or item, with its latest result, and only when that result is a warning or an error. When everything is in sync it says Nothing needs attention. The tab shows a count of the rows that need you. Each row has the time, a link to the customer, invoice, or price book item, a status, and one sentence saying what happened. A row has at most one button: Sync again, or Use QuickBooks rates for a tax difference. Some warnings are news, not a problem. A voided invoice, an archived customer, an inactive product, and a reversed payment are left in QuickBooks on purpose, so those rows have no button. Switch to All activity to see everything that was sent, newest first. Load more shows older rows. Activity older than about six months is removed.

Settings

Accounts

If you leave Tips account on Don’t post tips, the payment still syncs. The Activity tab notes that the tip was not posted. Any change on this page waits for Save.

When to sync

After a customer or product is in QuickBooks, every edit to it syncs again, whichever option you chose. Customers. Jomioz looks for a QuickBooks customer with the same name. One match is linked. More than one match means nothing is linked: the invoice is not sent, and the Activity tab says several QuickBooks customers use that name. Rename or merge them in QuickBooks, then use Sync again. When you import, you are asked to choose instead. Payments and refunds. The payment is applied to the QuickBooks invoice. A deposit on an estimate is a payment too. It sits in Undeposited Funds until the job invoice is in QuickBooks, then it is applied to that invoice. It does not become a second invoice. A refund comes off that payment, so the amount due goes back up. For a card refund, the money leaves the bank on the payout deposit.

Sales tax

Settings → Integrations → QuickBooks → Sales tax says how your QuickBooks works out tax. Jomioz reads it for you. When the setting is Calculated by QuickBooks, the page also shows Set your default tax rate, with a link to Settings → Tax. Set it to your own area’s rate, so new estimates and invoices start with the right tax. Estimates, jobs, and invoices take their tax from the same place: the customer’s tax-exempt setting, then the tax chosen for the job address, then your company default. So the tax on the estimate your customer agreed to is the tax on the invoice. See Tax.

When Jomioz and QuickBooks disagree

The invoice is always sent, unless it is held for a reason in the table. Activity then says why in one sentence, and offers the one thing that fixes it. Only a difference in rates offers Use QuickBooks rates. The other rows have no such button, because taking over QuickBooks’ rates would not fix them. When a rate is not in QuickBooks yet, Jomioz adds it with its percentage in the name (for example CA 7.375%). Rates keep up to four decimals. The first estimate in a brand-new area uses your company default, because QuickBooks has not seen that area yet. Set the tax for the address on the customer before you send the estimate, or send one invoice and use Use QuickBooks rates. After that, every estimate and invoice at that address uses the right tax.

Payouts, fees, and disputes

A paid Stripe payout becomes one deposit in the checking account you chose. Manual cash and check payments are not part of that deposit. Jomioz creates these accounts in QuickBooks the first time they are needed: A payout below zero cannot be a negative deposit. QuickBooks gets a journal entry out of checking for that amount, and a zero deposit that still lists the payments, fees, refunds, and disputes. If the numbers do not match, the deposit is not created. The Activity tab says why. For example:
  • “Stripe paid X but the Jomioz payments, fees, refunds, and disputes add up to Y.”
  • “Some payments in this payout are not in QuickBooks yet.” Send those invoices first. See Sync older items if they are from before you connected.
  • “Choose a checking account in QuickBooks settings.”

Import and older records

Both of these are optional, under the Import and older items tab. Import from QuickBooks copies your active customers and your Service and Non-inventory items into Jomioz. A matching name is linked. When a name matches more than one, you choose which one to link. The others stay unlinked. Anything already in Jomioz is not overwritten. Import copies top-level customers only. A QuickBooks sub-customer or job (named like Parent:Child) is skipped, because it would come back to QuickBooks as a separate customer. Sync older items sends work that already existed before you connected.
  1. Set Created on or after.
  2. Check Invoices. Check Payments only with invoices. Check Payouts only with invoices and payments.
  3. Click Start sync.
Drafts and voided invoices are skipped. Anything already in QuickBooks is left as it is. The sync runs in the background, so you can leave the page. The row under Previous syncs says Sending in the background until it ends. Previous syncs lists the latest three. Only one sync runs at a time.

Names and matching

QuickBooks reads a colon in a customer or product name as a sub-customer or sub-item. Jomioz sends a colon as a dash, so Panel upgrade: 200A becomes Panel upgrade - 200A in QuickBooks. Tabs and line breaks become spaces. A customer, vendor, or employee in QuickBooks can already use a name. The Activity row then says: “A customer, vendor or employee in QuickBooks already uses this name. Rename one of them, then sync again.”

Send something again

Sync again shows on an error row, and on a warning that sending again can fix. It sends that one customer, invoice, or item again, once the cause is fixed.
  • It never makes a second copy. Jomioz finds the one in QuickBooks by its link or its name.
  • If it was deleted in QuickBooks, it is created again, and the row says so.
  • A customer or product that was made inactive in QuickBooks is made active again when Jomioz sends it.

If something goes wrong

If Activity shows an error you do not understand, contact support and include the text of the row.

Reconnect

QuickBooks can stop accepting the connection: you disconnected Jomioz inside QuickBooks, or the connection went unused for about 100 days. The status then says Reconnect needed and nothing syncs. The page shows QuickBooks needs to be connected again, with only the connection on Settings. Click Connect QuickBooks there. Your links and account choices are kept. Jomioz refreshes the connection every day so it does not lapse.

Switch company or start again

Use Connect again under Settings → Connection. It asks whether to Keep the links or Clear the links.
  • Keep the links: customers, products, and invoices stay linked.
  • Clear the links: Jomioz forgets which QuickBooks customers, products, and invoices match yours. Everything already in QuickBooks stays there.
  • A different QuickBooks company always clears the links.

Disconnect

Disconnect QuickBooks, next to it, stops sending anything new and removes Jomioz from the company’s connected apps in QuickBooks. Everything already in QuickBooks stays there. You can connect again later. If your plan no longer includes QuickBooks, the QuickBooks page asks you to upgrade.